Fitting your Bassinette (optional)
Guide the support rods into the pockets in the base of the bassinette fabric (fig.19).
Slot the two corresponding support rod sections together, ensuring they are secure and in
a straight line (fig.20 & 21).
Place the mattress base on top of the support rods (fig.22), push the mattress down to
ensure it is flat (fig.23 & 24).
fig. 19
fig. 22
fig. 20
fig. 23
fig. 21
fig. 24
Fitting your Bassinette (optional)
Set up your travel cot following the instructions on page 4 as far as fig.4.
Losely lay the bassinette fabric inside the travel cot. Push the clips onto the top bars of
the travel cot all the way around the edge, ensuring they are all secure (fig.13 & 14).
Lift the fabric over each corner as shown (fig.15 & 16).
Push the retaining clips onto the corner bars of the travel cot (fig 17 & 18).
fig. 13
fig. 16
fig. 14
fig. 17
fig. 15
fig. 18
Press
Press
6
7
www.obaby.co.uk
www.obaby.co.uk
