Folding your Travel Cot
Press
Release the velcro tabs on the underside of the travel cot and remove the mattress
(fig.7 & 8).
Using the pull tab in the centre of the base, lift the base of the travel cot until the sides
are slack (fig.9).
Whilst pushing the release buttons in the centre of each top bar, one at a time, gently lift
then lower the bars to release the side supports (fig.10 & 11), repeat for all 4 sides.
Gather the feet and sides together, then wrap the mattress around the outside and
secure using the velcro tabs (fig.12), place into the storage bag.
fig. 7
fig. 10
fig. 8
fig. 11
fig. 9
fig. 12
Setting up your Travel Cot
Unzip the storage bag and remove the travel cot (fig.1).
Unfasten the velcro tabs and remove the outer mattress then spread the feet apart
(fig.2).
Grasp the top bars, one at a time and lift up until they lock into place (fig.3), repeat for
all 4 sides.
Push down in the centre of the base until flat (fig.4).
Place the mattress base into the bottom of the cot, padded side upwards (fig.5).
Thread the velcro tabs on the underside of the mattress through the holes in the base of
the travel cot and secure underneath the travel cot (fig.6).
fig. 1
fig. 4
fig. 2
fig. 5
fig. 3
fig. 6
Press
Lift
“Click”
4
5
www.obaby.co.uk
www.obaby.co.uk
