OBaby Tour, Instruction Manual

Page: 4 / 7

Fitting and Removing the Front Wheel
fig. 11 fig. 12 fig. 13
Using the Front Swivel Wheel
To lock the swivel wheel, first ensure the wheel is facing forward inline with the chassis,
then lift the lever up (fig.14).
To put the wheel in swivel mode, push the lever down on the front of the wheel
(fig.15 & 16).
fig. 14 fig. 15 fig. 16
Adjusting the Backrest
Applying the Brakes
Lock
A
Release
Release
Lock
To fit the front wheel, push the wheel onto the front leg until it clicks into place (fig.11-12).
To Remove, press the lever (A) (fig.13), whilst pulling the wheel off the leg.
fig. 17 fig. 18 fig. 19
“Click”
fig. 20 fig. 21 fig. 22
1.Press
2.Pull
To recline the backrest, press the button on the toggle and pull away from the seat to the
desired height (fig.20). Lower the seat to rest on the toggle (fig.21).
To put upright, grip the sides of the toggle with one hand, and the strap with the other
hand and slide the toggle up the strap to the desired height (fig.22).
To lock the brakes fully, push down on the brake lever using your foot (fig.17 & 18).
To release the brakes, lift the brake lever using your foot (fig.19).
Apply the brake before putting your child into the pushchair.
Apply the brake when the pushchair is stationary.
6
7
www.obaby.co.uk
www.obaby.co.uk