OBaby 10DB0702, Instructions Manual

Page: 4 / 9

Fitting and Removing the Front Wheels
fig. 13 fig. 14 fig. 15
Using the Front Swivel Wheels
To lock the swivel wheels, first ensure the front wheels are facing forward inline with the
chassis, then lift the lever up (fig.16).
To put the wheels in swivel mode, push the lever down on the front of each front wheel
(fig.17 & 18).
fig. 16 fig. 17 fig. 18
Adjusting the Backrest
Applying the Brakes
Lock
Release
Release
Lock
To fit the front wheels, push the wheels onto the front legs until they click into place
(fig.13 & 14).
To Remove, squeeze both clips together whilst pulling the wheel off the leg (fig.15).
fig. 19 fig. 20 fig. 21
“Click”
fig. 22 fig. 22a fig. 23
To recline the backrest, lift the lever behind the seat and lower backrest to the desired
height (fig.22).
To put upright, simply push the backrest to the desired height (fig.23).
To lock the brakes fully, push down on each brake lever using your foot (fig.19 & 20).
To release the brakes, lift each brake lever using your foot (fig.21).
Apply the brake before putting your child into the pushchair.
Apply the brake when the pushchair is stationary.
Lift
6 7
www.obaby.co.uk
www.obaby.co.uk