Open Access Technology International, Inc.
06/23/2015
|
Page 7 of 10
GridPort Draft User Manual v2.0 – FOR FCC CERTIFICATION
This document contains proprietary and confidential information of OATI, Inc. Do not copy or distribute without explicit permission of OATI, Inc.
©2015 Open Access Technology International, Inc.
3.
GridPort Features
3.1
Connecting End Devices
GridPort is able to connect to a wide variety of devices.
If you are participating in utility “Energy Savings” programs, supported devices will show up
in the list of available devices on the webSmartViewMobile application. Refer to the available
end device’s User Manual for pairing instructions.
3.2
Shut Down
To shut down the GridPort, press the power button on the back of the GridPort momentarily.
The Network, Status and HAN Lgihts will turn amber indicating that shutdown has started.
When all Lights are off, the GridPort is shut down and can be safely unplugged.
3.3
Network Reset
A network reset feature is available on the GridPort. This will reset only the network settings,
leaving all other device data intact. To reset the network settings use a paperclip or other
small object to press and hold the reset button for approximately 3 seconds. The Network
Lights will flash rapidly for a few seconds to indicate the network settings were cleared. DO
NOT hold the reset button for over five seconds or a factory reset will result!
3.4
Factory Reset
To perform a factory reset, using a straightened end of a paperclip, press and hold the reset
button for five seconds. The factory reset will perform the same steps as the Network Reset
and, in addition, will clear all user configuration settings including paired devices.
