Open Access Technology International, Inc.
06/23/2015
|
Page 6 of 10
GridPort Draft User Manual v2.0 – FOR FCC CERTIFICATION
This document contains proprietary and confidential information of OATI, Inc. Do not copy or distribute without explicit permission of OATI, Inc.
©2015 Open Access Technology International, Inc.
Connecting to a Wireless Access Point can be done two ways:
1.
On routers with a wireless settings button, you may connect your GridPort by quickly and
easily following these steps:
a.
Press the wireless settings button on the wireless router.
b.
Press the wireless settings button on the GridPort within 60 seconds of Step a.
c.
The Network Light (see Table 1) will change from flashing red to solid red after
approximately 10 seconds.
d.
If the Network Light turns green, the cloud connection was successful. If the light
does not turn green, verify your local internet connection is functioning properly. If
your local internet connection is functioning, refer to the troubleshooting guide
located at <insert URL>.
2.
Download OATI’s webSmartView application from the application store for your mobile
device. Follow the instructions on-screen to complete the setup and connection process.
