background image

Note:

  Be careful when using the red nozzle (0º) to avoid any injury. Only the black nozzle is a low-pres-

sure foam nozzle for spraying detergent, and the other nozzles are high-pressure nozzles that do not 

generate foam. 

Note:

  When filling the detergent, please remove the spray nozzle to keep the appliance at low pressure. It 

's better to use liquid detergent. Do not put any solid cleaner into the detergent tank avoiding the filter 

blockage. If  you want to use the solid cleaner, please water down the solid cleaner thinning it first, then 

pour it into the detergent tank. Besides, if you hope to clean the car, we recommend you choose the car 

wash soap for better cleaning effect.

English

1) Plug-n-play

2) 5 different spray nozzles (0°, 15°, 25°, 40° and black soap spray nozzle) can tackle various cleaning 

tasks. You can replace different nozzle as you needs.  

Red /0 degrees

 - areas that are high and hard to reach; clean crevices in sidewalks or driveways.

Yellow / 15 degrees

 - use on concrete, brick and other hard surfaces with stubborn stains.

Green/ 25 degrees

 - use on painted surfaces, wood siding, fences and lawn mowers.

White / 40 degrees

 - use on windows and screens.

Black / Soap 

- low pressure foam nozzle for spraying detergent.

1)Pull out the tank and remove the cap.

2)Fill with the detergent, and cover the cap.

3)Put the tank back into the appliance .

5.Fill & Install The Detergent Tank

Detergent

01

02

03

04

05

06

07

Summary of Contents for CW8











Reviews: