![background image](http://html2.mh-extra.com/html/oasser/cw8/cw8_user-manual_3121605010.webp)
Troubleshooting
English
Trouble
Cause
Remedies
The appliance fails to start up
Pump stops working
Fluctuating pressure
The appliance does not reach
the operating pressure
The appliance often starts or
stops to work by itself (Stop at
low pressure)
Trigger gun is unusable
1.Poor contact with the plug
2.Socket issue
3.Extension power cord issue
4.Incorrect voltage
5.The power switch is off
6.Fuse falls off (If it's used)
High temperature of the pump
due to lack of water
1.Spray wand blocked
2.Pump body is sucking air
3.Impurities inside the pump
1.Spray wand blocked or worn
2.Inadequate supply of water
3.Inlet hose kinked
4.Filter blocked
5.Inlet hose blocked
1.Spring of the decompression
valve worn out
2.Water leakage of pump,
high-pressure hose, gun, etc
Trigger gun is locked
1.Connect to the plug
2.Try another socket
3.Try another extension cord
4.Check the voltage if it is correct
5.Turn on the switch
6.Replace fuse
Check the water inflow - put the
tube into the container with 10
litre water (per Minute)
1.Clean the spray head with
needle
2.Check if the high-pressure tube
connection is tight
3.Please consult after-sales service
1.Clean or replace spray wand
2.Check the inlet water flow-rate
3.Straighten out the hose
4.Clean the filter
5.Check the hose for leaks or
blockages
Please contact us
Unlock the gun
01
02
03
04
05
06
07
After Sales Services
Two year warranty period.
If you have any questions during use, please contact us via the following email, we will provide you with
the most satisfactory solutions and services
Summary of Contents for CW8
Page 1: ...CW8 Pressure Washers Model CW8 User Manual...
Page 2: ...Made in China...