•
Use only original and new parts to guarantee the reliability, optimization, and
performance of the OASIS water machine.
•
Always wear proper protection when performing any type of service or
maintenance.
•
When cleaning the unit, do not use corrosive acidic products, or metal
brushes.
•
Do not wash the unit using high-pressure water.
•
Connect to a water supply with a pressure of 45 PSI minimum to 100 PSI
maximum (3.10 bar minimum to 6.89 bar maximum ).
•
WARNING:
DO NOT USE WITH WATER THAT IS MICROBIOLOGICALLY UNSAFE
OF UNKNOWN QUALITY.
•
ATTENTION:
IT IS IMPORTANT TO MAKE PROPER CONNECTIONS TO THE
QUICK CONNECT FITTINGS TO AVOID LEAKS.
SEE SECTION 5
.
•
CAUTION:
DO NOT PLACE UNDUE STRESS OR SIDE LOAD ON ANY OF THE
PLASTIC FITTINGS.
2. IMPORTANT REQUIREMENTS
2. IMPORTANT REQUIREMENTS
2. IMPORTANT REQUIREMENTS
2. IMPORTANT REQUIREMENTS
4
BEFORE YOU START USING THIS WATER DISPENSER, PLEASE READ THE
FOLLOWING INSTRUCTIONS CAREFULLY.
•
The unit must be connected to a 115 VAC GFCI or 230VAC power supply as
listed on the equipment data label.
•
The unit must be protected by a properly installed 20 amp circuit breaker.
Verify that the electrical current is correct for the power of this unit, which is
listed on the machine data label.
•
To avoid electrical shock always unplug the unit from the electrical outlet
before servicing.
•
If the power supply cord is damaged, it must be replaced by a special cord or
assembly available from the manufacturer or its service agent.
•
This appliance must be earthed.
•
Children should be supervised to ensure that they do not play with this
appliance.
3. SAFETY WARNINGS:
3. SAFETY WARNINGS:
3. SAFETY WARNINGS:
3. SAFETY WARNINGS:
