7. SET
7. SET
7. SET
7. SET----UP GUIDE FOR DISPENSER PCB ELECTRONICS:
UP GUIDE FOR DISPENSER PCB ELECTRONICS:
UP GUIDE FOR DISPENSER PCB ELECTRONICS:
UP GUIDE FOR DISPENSER PCB ELECTRONICS:
•
Units - Gallons
•
Unfiltered unit
•
Flow Meter = Rate Selected
•
Filter Capacity = 1250 gallons [4731 liters]
Pushbutton
Factory default program settings are:
•
Bottle Count = 0.5L (1 Bottle)
•
Flow Rate = 1.2 GPM
•
20 second maximum dispense time
To change the program settings, follow these steps:
Top panel will need to be removed by taking out the two screws on each side. Set aside until
programming is complete. Remove wire tie bundling pushbutton inside bottle dispenser. You
can then adjust program using the pushbutton through the top of the dispenser
.
12
P/N 030099-626, 7/2020
©2020 LVD Acquisition, LLC; OASIS is a registered trademark of LVD Acquisition, LLC dba OASIS International.
