7
PREPARING THE WATER SYSTEM
Your cooler can be used with a direct water line connection and filtration system. The filtration system can be
installed prior to the water dispenser or can be installed inside the cabinet behind the door.
Do not use water
that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system
Fig. A
WATER TUBE CONNECTION/ DISCONNECTION PROCEDURES
1.
To connect, push tube through collet ring into
body.
2.
Tube must sit fully past o-ring.
3.
To disconnect, hold collet ring against body and
pull tube out.
1. Locate the Water Inlet Bulkhead at the back of the unit. Remove the plug and insert the water source tubing
(1/4”) into the bulkhead. Ensure the water line is secure.
Summary of Contents for MAXXFILL PULSE
Page 12: ......
