5
For adhesive residue, apply rubbing alcohol
or nail polish remover, full strength. (Rinse
surface thoroughly)
WARNING!
BATH MATS AND OTHER ITEMS
HELD IN PLACE USING SUCTIONS
MUST BE REMOVED FROM THE UNIT
SURFACE AFTER EACH USE.
OVER AN EXTENDED PERIOD,
FAILURE TO REMOVE
SUCTION ATTACHED ITEMS
WILL DAMAGE THE UNIT SURFACE.
2” Dia. Drain
4-1/4”
2-1/2” Dia. Overflow
1-3/4“ Drain
Clearance
Leveling Supports
2“ Rim
Beveled Edge
18 -3/4”
36“
42”
8-5/8”
33-3/8”
14-3/4”
16-1/2”
71-3/4”
35-3/4”
20-3/4”
15” x 4”
Faucet Area
15” x 4”
Faucet Area
Futura 4272 / OV-B-320, OVG-320
2. The factory-leveled block base MUST fully
rest on the floor and be used as the unit support.
Shimming of one or more blocks may be
necessary to maintain level.
3/4” rail
positioned
1/16”
below rim
Confirm drain position.
Confirm leveling blocks are flush on floor
Confirm top of tub is level along both
sides and at each end of unit
3. The base and/or whirlpool
system may extend to the outer edge
of the unit, making it impossible to
insert the unit in a deck cut out without
causing damage.
4. Selective placement of
framing members may be
required to avoid damaging
whirlpool system components.
1. The installation CANNOT allow the
rim to support the weight of the unit.
3/4” rail positioned
1/16” below rim
2” Dia. Drain
2-3/4”
2-1/2” Dia. Overflow
1-1/4“ Drain Clearance
Leveling Supports
2“
Rim
18”
16-3/4”
18-3/4”
43-3/4”
71-3/4”
11-3/4”
32”
20-3/4”
35-3/4”
36”
15” x 2”
Faucet Area
Classic 4472 / OV-B-380
