Oase Vitronic Series, Operating Instructions Manual

Page: 16 / 142

- EN -
16
Commissioning/start-up
W A R N I N G
Possible death or severe injury from hazardous electrical voltage!
• Prior to reaching into the water, isolate (switch off and disconnect) all units/devices used in the water.
• Isolate the device (disconnect from the power supply) before carrying out any work on it.
Prerequisite
• First switch on the pump, then the UVC clarifier.
• Check all connections for leaks.
Switching ON/switching OFF
• Switching on: Insert the power plug into the socket.
– The unit switches on immediately.
•
Switching off:
Disconnect the power plug.
Check the function.
Vitronic 11 W

F
• The function display is lit when the UVC lamp is switched on.
Vitronic 18 W / 24 W / 36 W / 55 W

G
• The function display is lit when the UVC lamp is switched on.
• The transparent stepped hose adapters are lit when the UVC lamp is switched on.
Remedy of faults
Malfunction Cause Remedy
The performance of the unit is not satisfactory The water is extremely soiled Remove algae and leaves from the pond,
change the water
The quartz glass is soiled Clean the quartz glass
The UVC lamp capacity is exhausted The lamp must be replaced after 8000 operat-
ing hours
Flow rate is too high Reduce the pump output
UVC lamp is not lit Power plug not connected Connect power plug
UVC lamp defective Replace the UVC lamp
Connection defective Check electrical connection
UVC overheated Vitronic 55: UVC automatically switches on
when it has cooled down
Maintenance and cleaning
W A R N I N G
Possible death or severe injury from hazardous electrical voltage!
• Prior to reaching into the water, isolate (switch off and disconnect) all units/devices used in the water.
• Isolate the device (disconnect from the power supply) before carrying out any work on it.
Cleaning the unit
N O T E
Recommendation regarding cleaning:
• Clean the unit as required but at least twice a year.
• Do not use aggressive cleaning agents or chemical solutions as they could attack the housing or impair the function
of the unit.
• Recommended cleaning agent for removing stubborn limescale deposits:
– Pump cleaning agent PumpClean from OASE.
– Vinegar- and chlorine-free household cleaning agent.
• After cleaning, thoroughly rinse all parts in clean water.