Oase ProfiClear Premium TF-L Pump Fed EGC, Operating Instructions Manual

Page: 49 / 386

- EN -
49
4.4 Unit configuration

C ProfiClear
Premium TF-L
pump fed EGC

D ProfiClear Prem
ium TF-L gravity
fed EGC
Description
1 1 Container cover
2 2 Signal box with level detection device (3) and temperature probe (4)
• The signal box is connected to the control system (19, 21)
3 3 Level detection device
• Signals the water level in the filter system
— 4 Pump status detection
• Signals a pump failure
5 5 Temperature probe
• monitors the water temperature
6 6 Filter drum with eight screen elements
• screen elements for coarse dirt down to 60 µm in size (also optionally
available with 150 µm)
7 7 Rinsing device
• sprays water at high pressure onto the screen elements (6) to rinse off
the coarse dirt
8 8 Dirt channel
• collects the coarse dirt and rinsing water from the screen elements (6)
9 9 2 x DN 150 outlet
10 10 Rinsing pump
• for supplying the rinsing device (7)
11 11 Rollers
• for guiding the filter drum
12 12 DN 75 dirt outlet with slide valve
13 13 5 × fibre discs 6 × 12 × 1 mm as spares (expansion seals)
14 — Connection set for connecting filter pumps
• for connection to 50 mm (2 ") connections (16)
15 — Connection set for a Bitron UVC clarifier
• for connection to 38 mm (1½ ") connections (17)
16 — 2 × 50 mm (2 ") connections for connecting the filter pumps, with internal
non-return valves
17 — 2 × 38 mm (1½ ") connection, closed with sealing plugs
• Optional connection for a Bitron UVC clarifier
18 18 DN 110 dirt outlet for coarse dirt
19 19 Drum motor for filter drum
• the motor is connected to the control system (21, 22)
— 20 2 × ground stakes for installing the control system with EGC box
21 21 Control system with EGC box
22 22 Connector for drum motor
23 23 Connector for signal box
24 24 Mains connection cable
25 25 Connector for rinsing pump
26 26 Fuse holder
• Fuse protection of the control system with 5 × 20 mm, T8 A 250 V
safety fuse
— 27 DN 110 inlet
— 28 3 × DN 110 inlets, with cover cap
• For optional use
29 29 2 × caps, cap nuts for fixing the EGC box when mounting it on the
container wall