Oase Proficlear Module 1 Operating Instructions Manual Download

Page: 9 / 106

Entsorgung

Das Gerät ist gemäß den nationalen gesetzlichen Bestimmungen zu entsorgen. Fragen Sie Ihren Fachhändler.

Störungen

Information about this operating manual

Please read the operating instructions and familiarise yourself with the unit prior to using it for the first time. Adhere to the
safety information for the correct and safe use of the unit.

Intended use

The Profiline Modulfilter series, in the following text termed unit, is exclusively intended for the mechanical and biological
cleaning of garden ponds with or without fish population at a minimum water temperature of +8 °C. The unit must not be
used for commercial or industrial purposes and not in conjunction with chemicals, foodstuffs, and easily flammable or
explosive substances.

Use other than that intended

Danger to persons can emanate from this unit if it is not used in accordance with the intended use and in the case of
misuse. If used for purposes other than that intended, our warranty and operating permit will become null and void

Safety information

OASE

has manufactured this unit according to the highest quality standards and the valid safety regulations. Despite the

above, hazards for persons and assets can emanate from this unit if it is used in an improper manner or not in accordance
with its intended use, or if the safety instructions are ignored.

For safety reasons, children and young persons under 16 years of age as well as persons who cannot recognise
possible danger or who are not familar with these operating instructions, are not permitted to use this unit! Take
appropriate measures that no one can fall into the filter containers and drown!

Please keep these operating instructions in a safe place! Also hand over the operating instructions when passing the unit
on to a new owner. Ensure that all work with this unit is only carried out in accordance with these instructions.
The combination of water and electricity can lead to danger to life and limb, if the unit is incorrectly connected and
misused.

Electrical installations at garden ponds must meet the international and national regulations valid for

installers:

– It is not permitted to install units operated with a rated voltage of 230 V in swimming ponds.
– A minimum distance of all units and all electrical connections to the pond must be adhered to

(e.g. in Germany 2 m, in Switzerland 2.5 m)

In this case, use filter module M 1 (pump chamber) to safely install the filter pump in conformity with the standards. Refer
to the documentation of the individually used units. Keep the power plug and all connection points dry! Protect the
connection cable when burying to avoid damage. Only use cables, equipment, adapters, extension or connection cables
with an earthed contact and approved for outside use. Never carry out technical changes to the unit. Only use original
spare parts and accessories. Only allow authorised customer service outlets to perform repairs. Never use the pump for
fluids other than water! For your own safety, consult an expert when you have questions or encounter problems!

Function of the Profiline module filter

The Profiline module filter is a modular open filter system for the mechanical and biological cleaning of pond water. It
consists of five filter modules (M 1 - M 5) which can be combined in any desired way or can complement existing
configurations to meet the most varied requirements.

Module M 1 (pump chamber)

Module M 1 (pump chamber) is used to reduce pressure loss and excessive sludge formation in the filter pump as well
as for the safe installation in swimming ponds in conformity with the standards. Depending on the operating mode, module
M 1 is installed downstream of other filter modules (principle of gravity) or upstream (pumped system).

Module M 2 (Screenex coarse soiling separator)

With its two large surface Screenex separating sceens, Module M 2 (Screenex coarse soiling separator) permits the
mechanical removal of solid matter up to a particle size of 300 microns from the pond water.

Störung

Ursache

Abhilfe

Wasser wird nicht klar

- Gerät noch nicht lange im Betrieb

- Pumpenleistung nicht passend
- Wasser ist extrem verschmutzt

- Fisch- und Tierbestand zu hoch
- Screenex-Abscheidesiebe verschmutzt
- Bioballs verschmutzt
- Filterschäume verschmutzt

- Die vollständige biologische Reinigungswirkung wird erst

nach einigen Wochen erreicht

- Pumpenleistung anpassen
- Algen und Blätter aus dem Teich entfernen, Wasser

tauschen

- Richtwert: ca. 60 cm Fischlänge auf 1 m