Oase IceFree Thermo 200, Operating Instructions Manual

Page: 10 / 48

- EN -
10
Commissioning/start-up
W A R N I N G
The heating element becomes very hot during operation. Risk of burns in the event of contact.
•
Do not connect the unit to the power supply until the unit is in the water and the heating element is im-
mersed.
• Before performing any work on the unit, ensure that it is disconnected from the power supply and wait for
several minutes until the heating element has cooled down.
Switching on: Connect the unit to the mains. The unit switches on immediately.
Switching off: Disconnect the unit from the mains.
Maintenance and cleaning
W A R N I N G
Possible death or severe injury from hazardous electrical voltage!
•
Prior to reaching into the water, isolate (switch off and disconnect) all units/devices used in the water.
•
Isolate the device (disconnec t from the power supply) before carrying out any work on it.
If necessary, clean the unit with clear water using a soft brush.
Spare parts
The use of original parts from OASE ensures continued
safe and reliable operation of the unit.
Please visit our website for spare parts drawings and spare
parts.
www.oase-livingwater.com/spareparts
Disposal
N O T E
Do not dispose of this unit with domestic waste.
• Render the unit unusable beforehand by cutting the cables and dispose of the unit via the return system
provided for this purpose.