Oase HeatUp 25, Operating Instructions And Guarantee, Page: 15 / 152

- EN -
15
PRODUCT DESCRIPTION
Intended use
Only use the product described in this manual as
follows:
•
As a thermostat controlled aquarium heater.
• Operate in accordance with instructions.
The following restrictions apply to the unit:
• Only use indoors and for aquaristic purposes in
the home (not for commercial use).
•
Only operate with water at a water temperature
of +4 °C to +35 °C.
INSTALLATION AND CONNECTION
N O T E
•
Do not switch the unit on until it is immersed in
water.
•
The unit can be completely immersed in water.
•
Ensure that the unit is immersed in water at least
up to the minimum immersion depth marking.
N O T E
The desired water temperature can only be achieved
if the heating capacity of the heater is suitable for the
volume of water in the aquarium ( → Technical data)
and is positioned in an area with good water circula-
tion.
How to proceed:

B, C, D
• Turn the temperature controller to the desired
temperature value.
• Insert the supplied suction cups into the holder by
twisting.
– Pay attention to the alignment of the tab (it
should point upwards or to the side).
• Clamp the holder to the unit.
• Position the unit with the heating element
pointing towards the floor of the filled aquarium
on a clean, smooth surface in an area with good
water circulation.