Oase Bitron Premium 60 W, Commissioning, Page: 38 / 284

38
Bitron
Premium AquaMax Eco Assembly ma-
terial Installation diagram, see page 14
OASE accesso-
ries, art. no.
Note
120 W
Gravity
10000/15000/
20000 73752, 73757,
73758 d
Premium
8000/10000/
12000/
16000/20000 73536, 73750,
73752, 73757 e Use the pump without filter shells but with the
pump holder EC2 installed
Titanium 31000 48597, 2× 73750,
73753 f
Titanium 51000 2× 73750, 73658,
73754 g
Eco Expert
21000/26000/
36000/44000 73536,
1×/2× 73750,
73752,
1×/2× 73757 h
180 W
Gravity
10000/15000/
20000 73752, 73757,
73758 i
Premium
10000/12000/
16000/20000 73536, 73750,
73752, 73757 j Use the pump without filter shells but with the
pump holder EC2 installed
Titanium 31000 48597, 2× 73750,
73753 k
Titanium 51000 73658, 2× 73750,
73754 l
Expert
21000/26000/
36000/44000 73536,
1×/2× 73750,
73752,
1×/2× 73757 m
Fitting the UVC clarifier
How to proceed:
 G
1. Open the hose clip of pipe collar DN 110 and push the pipe collar onto the outlet of the UVC
clarifier.
2. Position the UVC clarifier in the container and connect the outlet with the outlet of the con-
tainer using the pipe collar. Tighten the pipe collar.
3. Use fastening brackets to fasten the UVC clarifier on the container.
–
The fastening brackets are fastened on the UVC clarifier and on the container wall.
4. Connect the outlet of the pump with the inlet of the UVC clarifier.
–
Assembly material: (
→
Combinations of UVC clarifier / filter pump)
5. Attach the switch box on the screws on the outer container wall. (
→
Installing the switch box)