Oase BioStyle 75, Commissioning

Page: 11 / 116

EN
11
Intended use
Only use the product described in this manual as follows:
• Filter and circulate water.
• Operate the product in compliance with the technical data.
The following restrictions apply to the unit:
• Never use the unit with fluids other than water.
•
Never run the unit without water.
• Do not use for commercial or industrial purposes.
Installation
Prepare filter cartridge

Thoroughly rinse all filter materials with warm water before the first use. Do not
open the Multi-stage filter cartridges.
Attach filter
How to proceed:

B
1. Place the filter on the aquarium rim so that the filter hangs vertically on the side of
aquarium.
2. Use the adjustable leveler to align the filter.
–
The adjustable leveler holds the filter vertically and supports it against the
aquarium wall.
3. Extend the telescopic intake to the desired height.
–
Make sure that no aquarium substrate (e.g. sand) is sucked in.
Requirements for reliable water intake:
•
Do not let the water level drop more than 5.5 in from the aquarium rim. This will
ensure that the pump draws in the water safely, e.g. after a power failure.
•
Fill the filter housing completely with water (before the first start-up and after
cleaning the filter housing).