Oase 33885, Operating Instructions Manual

Page: 14 / 201

- EN -
14 EAC Aquarium Controller
LED DISPLAY
The operating status of the EAC Aquarium Controller can be determined from the status LEDs on the LED display.
The device requires a few seconds to become ready after you switch it on.
5
A
LED colour LED status Description
– Off EAC Aquarium Controller is switched off.
Green Lit EAC Aquarium Controller is ready for operation and in Access
Point mode.
Flashing fast WPS is activated, EAC Aquarium Controller is waiting for the
WIFI router access data
Flashing slowly (2 seconds on,
1 second off)
EAC Aquarium Controller is ready for operation and connected
to the WIFI router.
Yellow Lit The EAC Aquarium Controller is starting up
Flashing slowly (2 seconds on,
1 second off)
EAC Aquarium Controller is searching for a connection to the
WIFI router.
Green + yellow Lit The EAC Aquarium Controller is in update mode
Green lit / yellow flashing Firmware Update in progress
Red Flashing Malfunction
Remedy:
•
Disconnect from the power supply. Wait for 10 seconds then
reconnect.
•
Reset the EAC Aquarium Controller to factory settings
•
Carry out a firmware update
NETWORK CONNECTION
The EAC Aquarium Controller and the smartphone/tablet must be connected via WIFI to operate.
Possible connection types
WIFI connection
Description How to proceed
Connect the EAC Aquarium Con-
troller and smartphone/tablet to
the WIFI router of your home net-
work with WPS.
•
The smartphone/tablet stays connected to the WIFI
router.
•
EAC-compatible end devices can be controlled via the
OASE web portal
•
The smartphone/tablet can access the internet.
(→ Connecting to the
WLAN router via WPS)
Directly connecting the EAC Aquar-
ium Controller and
smartphone/tablet
•
The EAC Aquarium Controller and smartphone/tablet are
not connected to the home network.
•
EAC-compatible end devices cannot be controlled via the
OASE web portal.
•
Smartphone/tablet cannot access the internet.
(→ Establishing a direct
WIFI connection between
the EAC aquarium con-
troller and the
smartphone/tablet )
Connect the EAC Aquarium Con-
troller and smartphone/tablet
manually via the WIFI router of the
home network.
• The smartphone/tablet stays connected to the WIFI
router.
• EAC-compatible end devices can be controlled via the
OASE web portal
• The smartphone/tablet can access the internet.
(→ Connecting to the
WIFI router manually)