Oase 33885, Operating Instructions Manual

Page: 13 / 201

- EN -
13
PRODUCT DESCRIPTION
EAC Aquarium Controller is a control system for up to
five EAC-compatible end devices. The unit is controlled
by WIFI via a smartphone/tablet and can also be con-
trolled over the OASE web portal.
Information about EAC and the possibilities it offers
can be found at :www.oase-livingwater.com/eac-start
The “OASE app” is required to operate the EAC Aquar-
ium Controller . This can be installed on your
smartphone/tablet via the App Store.
Unit configuration
5
A EAC Aquarium Controller
1 EAC transformer connection
2 EAC-compatible end devices connection
3 LED display
• Indicates the operating status of the EAC
Aquarium Controller on (→ LED display)
4 WPS button / reset button
• Establishes a WIFI connection via WPS
• Returns EAC Aquarium Controller to factory
settings
Intended use
Exclusively use the EAC Aquarium Controller as fol-
lows:
•
Operation only as device control system for EAC-
compatible OASE end devices.
• Operate in accordance with instructions.
(→ Technical data)
•
Only use indoors and for aquaristic purposes in the
home (not for commercial use).
Accessories
• EAC Transformer (INT: 33888, GB: 33889) for power
supply.
•
EAC Y Adapter (33897) to operate several EAC-
compatible end devices at one EAC Aquarium Con-
troller outlet.
•
Power Adapter (33898) to integrate an additional
EAC Transformer.
CONNECTION
For the power supply of the EAC Aquarium Controller
and the EAC-compatible end devices, an EAC Trans-
former is required. (→ Accessories)
5
C
If the power consumption of the EAC-compatible de-
vice connected to the EAC Aquarium Controller ex-
ceeds the max. connected load of the EAC Transform-
ers,, one or several additional EAC Transformer with
power adapters must be integrated into the EAC sys-
tem.
How to proceed:
5
A, B
• Connect EAC Transformer and EAC-compatible end
device with EAC Aquarium Controller.
–
The lug of the connector must lock into place
with the socket of the EAC Aquarium Controller .
SWITCHING ON AND OFF
• Switching on: Connect the unit to the mains. The
unit switches on immediately.
•
Switching off: Disconnect the unit from the mains.