6
DIRECTIONS FOR USE
CAUTION
PREPARATION FOR USE
Do not overhang the platform frame beyond the WARNING line on the
frame.
Unpack and inspect all components. Identify the components and their
use with the pictures located in the Product Description Section of this
manual.
All components are shipped in a clean but not sterile condition. If the
Spine Positioning System II will be used for an indicated surgical proce-
dure, be sure to disinfect the components prior to use.
FACE REST PLATFORM ADJUSTMENT
Step 1 - Open cam.
Step 2 - Grasp platform and raise to
desired position.
Step 3 - Line up the locking pins on
the leg with the handle with the corre-
sponding holes on the center pieces.
(Minor platform “rocking” may be nec-
essary for the pins to enter the holes).
Do not force the cam to close.
Step 4 - Begin to close the cam,
making sure the legs clamp around
the center pieces. The legs will not
clamp around the center pieces
unless the pins are lined up with the
holes.
Step 5 - Close cam to the final posi-
tion. The pins should not be visible
once the legs are clamped and the
cam is locked.
Step 6 - Double check platform by
applying downward force to ensure
your face rest platform is securely
locked.
