10
rePAir ProceDUreS
2.
Emergency Stop Button:
Photo 1 below show the button activated, photo 2 below shows button
depressed / tripped.
(Rotate the button clockwise to release.) Do this to insure control box has power.
Photo 1 (Activated)
Photo 2 (Depressed)
3. Remove the strain relief and all cable from the control box. Remove ground wire from control box,
and disconnect power cord using a small straight screwdriver to release the plug lock (if applicable).
4. Remove the screws that hold the control box in place. Then remove the control box.
