background image

12

CARE & 

CLEANING

CARE & CLEANING

IMPORTANT

CAUTION

Before cleaning with any  
liquid cleaner be sure to un-
plug the power cord from the 
power outlet. Do not operate 
the table in standing water.

 

Be sure to read all 

 

 

cautions, warnings    

 

and instructions given   

in the manual to  prevent 
injury to both operator  
and client.

UPHOLSTERY

• 

Use only a mild solution of 4:1 diluted non-alcohol cleaner such as 409

®

, Fantastik

®

 

or some other non-abrasive cleaner to wipe down the metal and wooden surfaces. 

Apply with a damp (not wet) lint-free cloth. Be sure excess liquid does not drip 

onto, or into, any of the electrical controls or mechanisms. Be sure that the unit is 

unplugged before cleaning these areas. Wipe these areas dry carefully with a lint free 

cloth.

• 

Electronic and/or manual lift mechanisms require no general maintenance or  

lubrication. Hydraulic units may require yearly maintenance.

• 

If the table will be out of use for an extended period of time, the power cord 

should be unplugged from the receptacle. To prevent inadvertent damage to the 

plug or cord, the cable should be coiled and secured with a wire tie or rubber band.

• 

The wooden cabinetry of the equipment can be polished with any polish approved 

for wooden surfaces. Spray, or pour the polish onto a soft cloth and be careful not 

to get it onto other surfaces.

• 

It is important to visually inspect your table on a quarterly basis to ensure all  

components are working properly and safely. Be sure to tighten all bolts to be sure 

they are secure. Over time they may work their way loose, leading to an unsafe  

condition.

• 

 

•  The face rest and table extender should be removed when not in use.  

 

     These items should be stored in a cool, dry place.

BASE & CONTROLS

ACCESSORIES

CLEAN

 your upholstered items when needed using a mild solution of 

4:1 diluted non-alcohol cleaner such as Formula 409

®

, Fantastik

®

, or 

Green Windex

®

DISINFECT

 your  fabric with Protex, MadaCide, MadaWipe, Accell 

TB, Virox

®

 (Canada), or a diluted 1/10 bleach solution. Dry immediately 

after cleaning to remove excess cleaning solution. 

DO NOT

 use citrus based cleaners or other strong cleaners, such as alcohol, 

acetone, higher concentrations of bleach or other products that contain 

high concentrations of these substances. 

DO NOT

 expose the fabric to temperatures below 32°F/0°C or above 

95°F/35°C. 

DO  NOT

 expose the fabric to direct sunlight, adhesives, liquids, or 

abrasive materials. 

FAILURE TO FOLLOW RECOMMENDATIONS WILL 

VOID THE WARRANTY ON THE FABRIC.

Summary of Contents for Clodagh Virgo





















Reviews: