9
DIRECTIONS
FOR
USE
DIRECTIONS FOR USE
The
o
akworks
®
Virgo™ comes complete with a foot control or manual hand crank
that operates the height with ease.
Height Control - Electric Model
Operate the foot control as shown below to raise or lower the height of the table.
When operating the table’s controls, be sure to observe all cautions and warnings as
given in the manual.
ADJUSTING HEIGHT OF THE TABLE
CAUTION
CAUTION
When operating the
controls and making any
and all adjustments to the
table, move hands and
feet away from the working
mechanism of the table.
Children must be supervised
when around this equipment
by a responsible adult. Do
not leave children alone
or allow them to operate
the controls. Do not allow
children to crawl under the
table.
Foot Control: used to change height
UP
DOWN
BACKREST TOP OPERATION (IF APPLICABLE)
To raise the backrest,
lift the table top at the
head end of the table.
Raise backrest to the
desired height and
release. Backrest sup-
port arm will lock in
the nearest slot in the
side rail.
support arm
side rail
To lower the backrest,
lift the backrest slightly,
lift and hold the support
arm out of the slot and
lower the backrest to the
desired position.
