background image

3

WARNINGS

 /

 SAFETY

Improper use of this device can cause injury. Be sure to read all 

operating instructions prior to use to prevent injury to operator or client.

Electrical Shock Hazard.  

To reduce the risk of electric shock, always disconnect the table from 

the electrical outlet before moving the table or doing any maintenance 

or troubleshooting procedures. Never use this equipment if it has a 

damaged cord or plug. Use this equipment only for its intended use as 

described in these instructions. Do not use any attachment or accessories 

not recommended by the manufacturer.

To reduce the risk of burns, fire, electrical shock (electric model only)  

or injury: 

  • 

The power supply/control module is located under the top. Refer  

    servicing to qualified personnel and follow manual instructions    

    when doing any authorized troubleshooting. Before doing any work on  

    the unit, disconnect the power cord from the power outlet.

  • Before cleaning with any liquid cleaner be sure to un-plug the power cord  

    from the power outlet. Do not operate the table in standing water.

  • Before moving the table, disconnect the power cord from the power outlet  

    and secure the electrical cord and foot control out of the way for moving.

  • Risk of Electrical Shock. – Connect this table to a properly grounded outlet  

    only. See Grounding Instructions.

  • Use this furnishing only for its intended use as described in these  

    instructions. Do not use attachments not recommended by the manufacturer.

  • Never operate this table if it has a damaged cord or plug, if it is not working  

    properly, if it has been dropped or damaged, or dropped into water. Return  

    the table to a service center for examination and repair.

  • Keep the cord away from heated surfaces.
  • Do not  use outdoors.
  • Do not operate where aerosol (spray) products are being used or where   

    oxygen is being administered.

  • Maximum shelf load weight: 200 lbs. (91kg.)

Risk of Injury – Children should never be near the table when in use. The table 

must be locked out (use key lock) and controls stored out of reach if there is any 

possibility that children would be near the table when not in use.

Never drop or  insert any object into any opening.

 

WARNINGS & SAFETY INSTRUCTIONS

WARNINGS & SAFETY INSTRUCTIONS

READ AND  

SAVE THESE  

INSTRUCTIONS

DANGER

WARNINGS

Summary of Contents for Clinician





















Reviews: