DIRECTIONS
FOR
USE
3
DIRECTIONS FOR USE
FOOT CONTROL:
The O
akworks
®
Premiere
™
comes complete with a multifunctional foot
control that operates the backrest and leg rest positioning functions as
well as the height. The lifting motor is equipped with a thermal
overload limiter. It has a 10% duty cycle, 2 minutes operating and
18 minutes off.
When operating the
Premiere
™
controls and making
any and all adjustments to the
table, move hands, feet and
controls away from any work-
ing mechanisms of the table.
Children must be supervised
when around this equipment
by a responsible adult. Do not
leave children alone or allow
them to operate the controls.
Do not allow children to crawl
into the cabinet or under the
table.
Press and hold the appropriate button until the position desired is
achieved and then release. The arm rests (available on Salon Top) will
adjust automatically to provide the most in comfort and ergonomics
while staying parallel to the floor, no matter what the position.
CAUTION
DAILY CYCLING
The O
akworks
®
Premiere
™
uses hydraulics and hydraulic fluids to adjust
the table height. Maintaining the quiet operation of your table requires
that you fully cycle your table (up & down) twice per day. Cycling of
the table will maintain the lubrication within the hydraulic cylinders for
continued smooth and quiet operation. When not possible, we recom-
mend that you cycle the table (up & down) four times at least once per
week.
1
Backrest UP
Backrest
DOWN
Legrest UP
Legrest
DOWN
2
High Range
Low Range
4
5
3
6
If you have the flat top model,
your table will be equipped
with a two button foot switch
to raise and lower the table.
