18
DIRECTIONS FOR USE
CAUTION
REMOVE / REPLACE THE TABLE TOP PAD
Make sure the top is not in motion when removing / replacing the table top pad.
Remove Table Pad by pulling flaps at the ends & sides
of the table until the hook and loop fastener becomes
unanchored.
Replace pad by first centering on the table and then
pressing flaps in place, anchoring with the hook and
loop fasteners.
ADJUSTING THE CRESCENT FACE PADS
(INTEGRATED HEADREST TOPS ONLY)
PRONE/SUPINE POSITIONING:
The Crescent Face Pad is held in place by hook and loop fasteners.
Place close in to the edge of the table with sides together for smaller patients or further away from the
edge with sides apart for larger patients.
Underside of Table
