![background image](http://html2.mh-extra.com/html/oakley/xk3101/xk3101_user-manual_3107224008.webp)
7
5. Operation Keys Instruction
[ZERO]/[↑] key
a.
Under weighing state, you can use this key to make the display return to zero.
b.
Used for increasing the value of the selected figure.
c.
Under weighing state, keep pressing this key for 3 seconds, the indicator will automatically convert
the weight unit between “kg” and “lb”.
[TARE]/[ENTER] key
a.
Under weighing state, you can use this key to deduct tare.
b.
Under calibrating state, you can use this key to definite the present state (result), at the same time
the indicator will prompt to enter the next step.
[ON]/[OFF] /[PRINT] key
a. Used for power-on and power-off.
b. Under weighing state, press this key, the serial interface will export the print signal.
[MODE]/[→] key
a.
Used for converting the mode between weighing and counting.
b.
Under calibrating state, you can use this key to choose the setup method or the given parameter
table, also use it to shift place while inputting the weight value on arbitrary point.
c. Under normal weighing state, keep pressing this key for 3 seconds, the indicator will enter the simple
calibration state.
6. Use Instruction
6.1 Turn-on Operation
Caution:
Make sure that the power voltage is within the required range before power-on.
Under power-on state, press [ON], firstly the indicator displays its model and then its edition
number; secondly it automatically checks the strokes from “9” to “0” and then enters weighing state.
6.2 Turn-off Operation
Under normal weighing state, keep pressing [OFF] for 3 seconds,at this time the indicator displays
“OFF” and then it is turn off automatically .