![background image](http://html2.mh-extra.com/html/oakley/xk3101/xk3101_user-manual_3107224019.webp)
18
[F7 X] refers to the Baud rate to be selected, with 5 options.
X=1 relevantly 600.
X=2 relevantly 1200.
X=3 relevantly 2400.
X=4 relevantly 4800.
X=1 relevantly 9600.
[F8 X] refers to extension display mode.
X=0 / 1.
X=0 refers to no extension display.
X=1 allow to extension display.
If you need to change the above data, press [→] to select and then press [ENTER] to confirm. If
don’t, directly press [ENTER], at this time the indicator enters F9 setup.
[F9 X] refers to user’s setup confirming or return to factory setup data.
X=0 confirm the user’s setup data.
X =1 return to the factory setup data.
See the following table for the factory setup data:
F1
F2
F3
F4
F5
F6
F7
F8
20
2
0.5
1.0
2.0
1
2
0
If you need to change the data, press [→] to select and then press [ENTER] to confirm. If don’t, directly
press [ENTER], at this time the indicator displays J1 on (method 2). Pull out the short circuiter W1 and
join 1 and 2 pin short, at this time the indicator start to self-check and then enters normal weighing
state after finishing the process.