![Oakley RAZRWIRE User Manual Download Page 12](http://html1.mh-extra.com/html/oakley/razrwire/razrwire_user-manual_3106640012.webp)
10
Battery
Do not attempt to remove the internal rechargeable battery. Disposal of devices that contain
internal rechargeable batteries must be in accordance with local environmental regulations.
Temperature
•
Do not store or use RAZRWIRE in temperatures lower than -20°C / -4°F or higher than
50°C / 122°F.
•
Do not recharge RAZRWIRE in temperatures lower than 0°C / 32°F or higher than 40°C /
104°F.
•
Conditions inside a parked car can exceed this temperature range. Do not store
RAZRWIRE in a parked car.
•
Do not store RAZRWIRE in direct sunlight.
•
Storing RAZRWIRE fully charged in high temperature conditions may permanently reduce
the life of the internal battery.
•
Battery life may temporarily shorten in low-temperature conditions.
Shockwave
Do not expose RAZRWIRE to excessive force or impact. Be careful not to drop RAZRWIRE.
Charger
Do not force the charging cable connector into the unit port. If the connector won't go into the port,
try flipping the connector 180 degrees. Do not attempt to charge RAZRWIRE with any charger other
than the one designed by Oakley specifically to be used with this product.
Cleaning
To clean the lenses, use the Microclear™ bag that is included with RAZRWIRE, or use a soft cotton
cloth. First, gently brush the cloth across all lens surfaces to remove any grit or particles that might
scratch the lens. Next, gently rub the lenses between the folds of the cloth. When necessary, hand
wash and air-dry the Microclear bag.
When cleaning RAZRWIRE, please note the following:
•
The transceiver unit is not waterproof, and moisture may damage the electronic circuitry.
Do not rinse or immerse any part of the unit. Keep the unit dry at all times.
•
Before cleaning, make sure RAZRWIRE is unplugged from the wall charger.
•
Do not clean the lenses with soaps, detergents, ammonia, alkaline cleaners, abrasive
cleaning compounds or solvents. These substances may damage the lens coatings or leak
into the unit and damage the electronic circuitry.
•
Should a lens become scratched, have it replaced immediately to ensure your vision is not
compromised.
Support
If your RAZRWIRE Bluetooth Accessory Module does not function, please make sure that the
battery is charged, you have followed the instructions to pair your Bluetooth phone to the
RAZRWIRE. In addition, go to www.oakley.com/RAZRWIRE for the latest support information. If
RAZRWIRE Bluetooth Accessory Module still does not function, contact Motorola Product Support
at www.hellomoto.com or 1.877.MOTOBLU.
Consumer Warranty
Oakley Eyewear Warranty Policy
You're now wearing the best eye protection on earth.
Only Oakley utilizes pure Plutonite® lens material, a proprietary synthetic that exceeds the optical
requirements of ANSI Z87.1 standards while inherently blocking 100% of all UVA, UVB, UVC and
harmful blue light. Oakley performance eyewear also takes advantage of patented XYZ Optics®, a
breakthrough that maintains precise clarity at all angles of vision and extends the range of optical
correction to the periphery of dual-spherical eyewear lenses and single-lens sports shields.
All Oakley sunglasses satisfy ANSI Z80.3 & EN 1836 standards for optical and mechanical
performance and are in accordance with the EC Directive 89/686/EEC for the I.P.D. of category I
corresponding to the European Community.
Light transmission ranges from 10% to 39% of available light. All transmission profiles are based
on data obtained according to ANSI Z80.3 and EN 1836 test protocols.
Summary of Contents for RAZRWIRE
Page 1: ......
Page 2: ......
Page 17: ......
Page 18: ...RazrWire_Quickstart BW Final 8 25 x 5 25 5 11 05 9 31 AM Page 2...