USING THE ROTATING BEZEL
The top bezel can be rotated to measure time intervals. Rotate the bezel
counterclockwise to align the “60” mark (which is also the zero mark) with the
minute hand on the main dial face. After a time interval, use the numbers on
the bezel to read the elapsed time in minutes. Note that the bezel rotates in
only one direction.
POWER SAVING MODE
When the timepiece is not in use, the battery life can be prolonged by pulling the
crown out to the second click position (b). This will stop the hands and reduce
power consumption.
LOW BATTERY INDICATOR
When the battery is running low, the small second hand will move in four-second
intervals. If this occurs, the watch will continue to display time accurately but the
battery should be replaced as soon as possible.
CRANKCASE THREE-HAND INSTRUCTIONS MANUAL 05
TO ADJUST THE TIME AND DATE FOR SUBSEQUENT SETTINGS, USE
THESE SHORT PROCEDURES
TO SET THE TIME
1. Pull the crown out to the second click position (b).
2. Turn the crown until you reach the correct time.
3. Push the crown back in. Gently turn the crown
clockwise until it screws back into the case.
TO SET THE DATE
1. Pull the crown out to the first click position (a).
2. Turn the crown until you reach the correct date.
If the current time is between 9:30 PM and 3:00
AM, set the date to the following day. (This is
necessary to ensure the date display will
normally change at midnight instead of 12
noon.)
3. Push the crown back in. Gently turn the crown
clockwise until it screws back into the case.
04 CRANKCASE THREE-HAND INSTRUCTIONS MANUAL
a
b
Second Hand
Date
Crown
Crankcase 3hand_ENG 10/1/07 11:57 AM Page 4