8 12 GAUGE
™
INSTRUCTION MANUAL
USiNG ThE ChrONOGrAph
THE CHRONOGRAPH INCLuDES THREE SEPARATE HANDS:
• The narrow hand on the main dial face counts seconds. One full rotation is 60 seconds.
• The larger hand on the sub dial at the left counts minutes. One full rotation is 30 minutes.
• The smaller hand on the sub dial at the left counts hours. One full rotation is 12 hours.
THE CHRONOGRAPH IS CONTROLLED WITH TWO PuSH BuTTONS:
• Button “A” stops and starts the timer.
• Button “B” has several functions. It is used to pause the display at the current split time (also called
“intermediate time”). It is also used to make the chronograph hands move forward to the ongoing time being
measured. Finally, it is used to reset the chronograph hands to the zero position.
Before using the chronograph, ensure the main crown is fully against the case and not at one of the click positions
used for setting time and date. The three chronograph hands should align precisely at the zero position. If they do
not, see the section Adjusting the Chronograph Hands.
TO mEASUrE AddEd TimE
Added time (cumulative time) is a measure of how much time has passed without including pauses. This feature lets
you exclude the time intervals you do not want to measure.
Start timing
Press button “A”.
Stop timing temporarily
Press button “A” to stop timing temporarily.
Press button “A” again to continue timing.
Continue to use button “A” to add additional time intervals to the total measure of time. When using button “A”
only, the time that passes while the chronograph hands are not moving IS NOT ADDED to the total measure of time.
See below if you wish to include this “split time” in the total measure of time.
reset
While timing is stopped, press button “B”.
