12 12 GAUGE
™
INSTRUCTION MANUAL
AdjUSTiNG ThE ChrONOGrAph hANdS
When the chronograph is reset with button “B,” the three chronograph hands return to the zero position. If these
hands do not align precisely with the zero position (such as after a battery change), use the following procedure
to adjust them.
TO ADJUST THE CHRONOGRAPH HANDS
1. If the chronograph hands currently show a measured time, use button “B” to reset them near the zero position.
Note that the hands must be stopped before using button “B” to reset them. If necessary, use button “A” to stop the
hands.
2. unscrew the main crown from the case. Pull the crown out to the second click position (b).
3. Push button “A” and button “B” simultaneously and keep them pressed for at least 2 seconds.
4. Adjust the chronograph hands by doing the following:
• Press button “A” to adjust the chronograph hand that counts seconds. (Press and hold the button for
continuous movement.)
• Press button “B” to finish with that hand and move on to the other hands.
• Press button “A” to adjust the chronograph hands that count minutes and hours. (Press and hold the button
for continuous movement.)
5. Push the crown back in. Gently turn the crown clockwise until it screws back into the case. Be careful not to over
tighten the crown, as this will damage the mechanism.
