Oakcastle SB-110, User Manual

Page: 23 / 28

23
EN
TROUBLESHOOTING
Symptoms Possible causes Solutions
Indicators on
front panel do
not light up
AC power cord is not
connected
Check that the power cord is plugged
into the wall socket.
Make sure the power switch is on.
No picture or
sound
The cables connecting the
TV and the receiver are not
properly connected Make sure that the correct cable is con-
nected between the TV and the receiver,
and that the antenna is connected.
The TV mode is not correct
Check that the correct video or AV input
has been selected on your TV.
Incorrect video definition
If you have a Composite or S-Video
connection to your TV, video definition
must be set to 576i. Press EXIT and then
V-FORMAT on the remote control until
you see a picture.
Picture and/or
audio glitch
Insufficient signal strength
Check that the antenna cable is securely
plugged in and that the signal is ade-
quate.
Electrical interference
Check that all antenna cabling is
quad-shielded.
No sound
The receiver or TV is in mute
mode Press the MUTE button on the remote
control and on the TV.
Initial volume level has not
been set on your TV Select the desired TV volume level using
the TV remote control.
Remote control is
not working
Batteries not inserted Insert batteries
Batteries are flat
Change the batteries in the remote
control.
Remote control is outside
the range of operation Aim the remote control directly at the
receiver.
Music files on
a USB memory
stick don’t
appear
Files are in wrong format
Check that the format is MP3.
Files are not at the root or
top level.
Move the files out of folders or
directories.