Oakcastle SB-110, User Manual

Page: 21 / 28

21
EN
Clearing and resetting data
You can reset the STB by restoring the unit to the default settings it had when
it left the factory (please see following section for instructions). This clears all
channels, stations, preferences and other user settings. You will need to rescan for
channels and stations before you can continue watching digital TV or listening to
digital radio.
WARNING: This procedure returns the STB to its default factory settings. All data
(such as time zone, channels, stations and timers) will be lost.
1. Press MENU (
Ref.10
) on the remote control to see the Main Menu.
2. Scroll across to ‘System’ on the menu, then press up or down (
Ref.11
/
Ref.14
)
until you have selected ‘Restore Factory Default’. Press OK (
Ref.13
).
3. A warning message will appear, asking you if you are sure you want to clear
all services and reset all settings. To continue, press OK (
Ref.13
). To cancel,
press EXIT (
Ref.4
).
Software Update
To update the software, please select ‘FTP Download’ under ‘USB’, ‘Network Apps’
in the menu.
However, if required to update the software manually, you can download the
software to your PC and then transfer it to your STB. You will need a USB memory
stick (not supplied with the STB).
1.
Once you have obtained an upgrade file, transfer it to a USB memory stick.
You need to place the file at the root (or top) level on the memory stick, not
inside a folder or directory.
2. Insert the stick in the USB port. Press MENU (
Ref.10
) on the remote control,
and select Software Update from the System section.
FACTORY RESET & SOFTWARE UPDATE