13
EN
Instruction Guide
RECALLING A STORED STATION (REMOTE CONTROL ONLY)
1. Once you have saved a station to one of the preset buttons, you can recall it
by pressing the MEMORY button.
2. Press the or until your desired station show on the display;
Press INFO on the device, the display will switch between multiple display modes.
The information of each display mode is displayed on the lower segment of
the display.
SIGNAL STRENGTH
The display will show a bar to indicate the signal strength. The stronger the signal,
the longer the bar will be from left to right.
PROGRAMME TYPE
This describes the “style” or “genre” of the program that is being broadcasted.
ENSEMBLE
This displays the name of the multiplex that contains the station you are listening
to. A multiplex is a collection of radio stations that is bundled and transmitted on
one single frequency. There are national and local multiplexes. Local ones contain
stations that are specific to that area.
NOTE: DAB (+), unlike normal radio, groups together several stations and transmits
them on one frequency.
FREQUENCY
This displays the frequency of the present station, such as “11C 220.352MHz”.
Then press the ENTER button
to
confirm into stations.
You also can recall the pre-set channels directly by pressing the CH+ or CH-
Button on remote control repeatedly.
DAB DISPLAY MODES
