7
EN
GETTING STARTED
Setting Up
Connect the DVD player power adapter to a wall outlet. Press the power button
(
Ref.44
/
Ref.1
) on the unit or remote control to turn on your DVD player, the display
on the front panel will illuminate.
Follow one of the steps below for connecting your DVD player:
Connecting Via RCA Cable
Connect an RCA cable between the 2 channel Audio Output port and the RCA input
on your TV.
Connecting via HDMI
Connect a HDMI cable between the HDMI Output on the back panel of the DVD
player (
Ref.46
) to the HDMI input on your TV.
Connecting via Component (Y Pb/Cb Pr/Cr) Cable
Connect a (Y Pb/Cb Pr/Cr) cable via the (Y/Cb/Pb Cr/Pr) Output of the DVD player
(
Ref.45
) to your TV (R/L/Video port and cable).
Programme Button
If the disc has two or more tracks, chapters, or titles, if desired, you can set up
playing order preference to be in a different order to the default order. Press the
PROG button (
Ref.3
) to open up Program mode, then use the number buttons
(
Ref.4
) to input the number of the track, title or chapter. To enter a double digit
number, first press the
10+
button once to get 10, twice to get 20, and so on,
followed by the second digit of your preference. Use the up/down/left/right keys
(
Ref.10
/
Ref.11
/
Ref.28
/
Ref.29
) to move the cursor to the next track, chapter or title
position you wish to program. After programming, navigate to the ‘PLAY’ button on
the screen, then press ENTER button (
Ref.12
) to start program playing. Navigate
to the CLEAR button on the screen, then press ENTER button (
Ref.12
) to clear all
settings.
To exit Program mode, press the PROG button (
Ref.3
) again.
Summary of Contents for DVD100
Page 1: ...DVD 100 U S E R M A N U A L...
Page 18: ......
Page 19: ......
Page 20: ...WWW OAKCASTLE CO UK...