6
Line Stage Specifications
Input Sensitivitiy: 80mV
Main Output Level (SE): 0.775V
Main Output Level (BAL): 1.55V
Maximum Output: >20V RMS or 28.2 dBu
Frequency Response: 0 - 650kHz -3dB @ 1.8VRMS Output
0 - 280kHz -3dB @ 20VRMS Output
Input impedance: 20k Ohms
Output impedance: (SE) < 47 Ohms and (BAL) < 100 Ohms
Total Harmonic Distortion: < 0.001% @ 100mV output 20Hz -20kHz
Signal to Noise Ratio: >110dB A-weighted input shorted
Overload Margins: 40dB (all inputs all audio frequencies)
Gain Range: -62dB to +10dB
Gain Resolution: 0.5dB
Mains Fuse: Model 220-240V 1A/250V anti surge (T) M205
Model 100-120V 2A/250V anti surge (T) M205
Weight .................................. 13 kg (15.5 lbs)
Shipping Weight ................. 14.6kg (18.96 lbs)
Dimensions .......................... 126(H) x 438(W) x 353(D)mm (4.96” x 17.25” x 13.9”)
Shipping Dimensions ........... 235 (H) x 570 (W) x 500 (D) mm (9.25” x 22.44” x 19.68”)
Mains Supply ....................... 110-120V or 220-240V, 50/60Hz
Warranty
OAD Ultrafidelity products are covered by a 3-Year Limited Warranty. This Limited Warranty initiates from
the date of purchase, and is limited to the original purchaser. Outside Australia, the authorized importing
retailer or distributor has accepted the responsibility for warranty of OAD Ultrafidelity products sold by
them. The specific terms and remedies for fulfilment of the Limited Warranty may vary from country to
country. Warranty service should normally be obtained from the importing retailer or distributor from whom
the product was purchased. In the unlikely event that technical service beyond the ability of the importer
is required, OAD Ultrafidelity will fulfil the terms and conditions of the Limited Warranty. Such product
must be returned at the purchaser’s expense to the OAD Ultrafidelity factory, along with a photocopy
of the dated purchase receipt for the product, a written description of the problem(s) encountered, and
any information necessary for return shipment. The cost of return shipment is the responsibility of the
purchaser.
All technical specifications are subject to change without prior notification.
