O4 MultiHopper, Manual

Page: 7 / 12

GB 11
Inflating the tyres
The tyres can be inflated to the correct pressure using a tyre pump
suitable for a car tyre valve. A reducing valve is required for this. The
tyres may also be inflated using a high pressure (bicycle) pump.
The correct tyre pressure is shown on the tyres (6 – 10 bar).
To ensure comfortable riding in the wheelchair, i.e. with the lowest
possible rolling and rotational resistance, it is important that the tyres
have the correct pressure. If the tyre pressure is low, the
wheelchair is heavier to ride and manoeuvre.
Advice
To safeguard the warranty and to ensure your safety, the
manufacturer recommends that the settings should be carried out by
your supplier.
MultiHopper
Pressure brakes
The pressure brakes are attached to the front of
the frame on the left and the right.
Pushing the pressure brake handle forward locks
the wheel.
Caution: make sure that your fingers do not become trapped between
the frame and the wheels or between the spokes of the wheels.
Wheel lock (optional)
The wheel lock is affixed in the hub of the
hand-rim wheel. Turn back the lever to lock the
wheel.
Disengage the brake on the wheel before
removing or replacing the rear wheel.
Settings and adjustments
Settings and adjustments
GB 10
Pressure brakes
Settings and adjustments Settings and adjustments
Hub brake