Filters are removed
in this order
Periodic maintenance of your air purifier is important. A good
rule of thumb is to give your unit a “once-over” every 30 to 40
days to ensure continued optimal performance.
IMPORTANT: Disconnect power cord from both unit and wall
prior to performing any maintenance function
GENERAL MAINTENANCE
Cleaning the Pre-Filter, HEPA Filter, Carbon and
Photo-Catalytic Filter
If Dirt is visible, take out the filters and remove particulate by:
WIPING the
carbon and photo-catalytic filters
with a clean
cloth or vacuum with brush attachment.
RINSING the
Pre-filter and HEPA filters
using hot water every 3
to 6 months, depending on usage, and allow to air dry.
Filters MUST BE thoroughly dry before re-installing.
WARNINGS:
DO NOT USE soap or detergent as it will damage the
material in the filters.
DO NOT USE a hairdryer to accelerate the drying time
!
Remove the Pre-Filter, the
HEPA filter, the Activated
Carbon and Photo-Catalytic
filters. Carefully remove the
white purification plate by
grasping the end and carefully
pulling straight out of the
card slot. Clean the plate
Cleaning the activated Oxygen O
3
Plate
Note: It is normal for the
ANION to cause some
particles to accumulate on
the front grill and fan blades.
Use a Phillips-head screw
driver to remove the (4)
screws in the front grill
cover.
Simply clean the
blades and grill with a damp
cloth or vacuum. Allow to
dry completely before re-
attaching the front grill
cover.
with a stiff brush using a 50/50 solution of ammonia and
hot water. Rinse plate in warm water and dry thoroughly
before re-installing.
The plate MUST BE thoroughly dry before
re-installing.
Cleaning the Front Grill and Fan Blades
WASHABLE
Hospital-Grade
HEPA Filter
CLEANABLE
Photo-Catalytic
Filter
Activated Oxygen
(PURIFY) O
3
Plate
WASHABLE
Dirt, Dust &
Debris Pre-Filter
3
4
CLEANABLE
Activated
Carbon Filter
