2
3
2. Insert the memory
*
and SIM cards
Now gently slide both the memory
SD card and the SIM card into
their holders, with their gold
contacts facing down.
(The cut-off corner of the SIM
card should mirror the corner
in the SIM card slot).
Press down the memory card
holder to close and lock it in
place. Then close the SIM card
holder and slide it upwards to
lock it in place.
Finally replace both the battery
(see instructions in the next
section) and the battery cover.
* There is no memory card contained in the standard box.
Getting started
1. Install the memory
card and SIM card
Firstly, make sure your Xda Orbit
is turned off before you install any
cards. Then remove the battery
by sliding the battery cover latch.
You’ll find this at the bottom of
your Xda Orbit. If the battery is
inside, simply remove it with your
finger by lifting the upper right
side of the battery slot.
Slide the SIM card holder
downward to unlock it, then
lightly flip it open. Then open
the memory card holder.
