Page 9
CERAMIC LOG MEDIA PLACEMENT
Figure 1,
Place the largest log diagonally
centered of the burner and the
curved as shown below.
Figure 2,
Please the larger two logs as
desired using the largest log as the
support.
Figure 3,
Place the balance of the logs as
desired. Make sure to leave
enough space for proper air flow.
Note: See Page 7 for Protective Screen Media Clearance
CAUTION:
BURN HAZARD. LAVA GRANULES, CERAMIC LOGS and CERAMIC ROCKS
WILL REMAIN HOT FOR SOME TIME AFTER USE.
YOU MUST MAINTAIN THE LAYOUT AS SHOWN TO ENSURE PROPER OPERATION OF YOUR FIRE PIT.
IF YOU NEED TO REPOSITION ANY MATERIAL TO MAINTAIN THE PROPER LAYOUT, USE HEAT
RESISTANT GLOVES OR ALLOW MATERIAL ADEQUATE TIME TO COOL BEFORE HANDLING.
CAUTION:
Lava granules used in a fire pit are porous and when heated up to normal operating temperature
can cause trapped gasses or moisture to expand and cause a "pop" and "launch" outside of the fire pit, which
could cause injury or property damage. Allow lava granules to completely dry after getting wet
,
rained on or
hosed off, before lighting and using the fire pit.
