![background image](http://html.mh-extra.com/html/o-s-engine/max-32sx-h-series/max-32sx-h-series_owners-instruction-manual_719755008.webp)
BASIC ENGINE PARTS
Heatsink Head
Carburetor
Typr 20C
Crankshaft
Propeller nut
Crankcase
Needle valve
Glowplug
Beam Mount
Recoil Starter
Assembly No.O
MAX-32SX-HX
Starter Handle
INSTALLING THE GLOWPLUG
Install washer on glowplug
and insert carefully into
cylinder-head, making sure
that it is not cross-threaded
before tightening firmly.
Glow plug
Washer
INSTALLATION
The under-surfaces of all O.S. engine beam
mounting lugs are precision machined flat and
exactyly parallel to the engine's horizontal axis. It is
essential that the engine mounts in the model are
also accurately made and aligned. If they are not,
they will cause stress and distortion within the engine
itself, probably resulting in loss of performance and
internal damage.
The recommended screws for securing the engine to
the engine mounts in the model are 3mm or 4-40
steel Allen type. It is also advisable to use lock
washers or LOCTITE to prevent nuts from loosening.
7
Summary of Contents for MAX-32SX-H Series
Page 31: ...MEMO 30 ...