Page
7
of
14
Siren and BMS Outputs
•
Local Alarm / Siren connections Sounds when the LED Flashes and
Stops sounding when the alarm is acknowledged.
•
BMS Remote connection is an output volt free passive contact that is normally closed,
this
connection ‘OPENS ‘when an alarm is detected and the associated LED flashes
,
The contact remains open even after the alarm has been acknowledged and will only
close when the LED’s are Green and in the safe operation mode.
This ensures BMS systems and similar control monitors can see when they are made
safe and not simply acknowledged locally.
Alarm Mute
•
The T4000 has the capability of muting the audible alarm without deactivating
The remote output by simply pushing the ALARM/MUTE button, the sounder will be
Muted until the button is depressed.
Test Mode
•
The T4000 has the capability of checking the audible alarm without activating
The remote output by simply pushing the ALARM/TEST button, the sounder will
Alarm as long until the test button is depressed.
