When using equipment, a few safety pre-
cautions must be observed to avoid injuries
and damage.
앬
Read the operating instructions carefully
and comply with them. It is important to
consult these instructions in order to
acquaint yourself with the unit, its proper
use and safety regulations.
앬
Keep this manual in a safe place, so that
the information is available at all times.
앬
If you give the equipment to any other per-
son, give them these operating instructions
as well.
We accept no liability for damage or acci-
dents which arise due to non-observance of
these instructions.
Packaging
The unit is supplied in packaging to prevent its
being damaged in transit. This packaging is
raw material and can therefore be reused or
can be returned to the raw material system.
GB
8
Table of contents
1. Scope
of
use
2. Safety
information
3. Layout
4. Items
supplied
5. Assembly
6. Technical
data
7. Pump diaphragm maintenance
8. Ordering spare parts
Pull out the pump lever as far
as possible and unscrew it
counter-clockwise.
Hold the spray lance and do
not direct the jet at other
people.
Do not expose pressurized
tanks to constant sunlight.
Do not place toxic sub-
stances in the pressurized
tank or spray them.
Read the operating instruc-
tions before use.
Flat jet angle 60°
Do not expose tanks filled
with spray solution to tem-
peratures below zero.
Depressurize the tank before
starting any cleaning and
maintenance work. Pull the
pressure valve upwards and
release the pressure.
Explanation of the symbols on the machine
Anleitung DSP 5 OK SPK7 26.01.2006 8:02 Uhr Seite 8
