background image

 

- 8 - 

6.3.2.1 NORMAL mode sub menu 

 Type

 

Move cursor to TYPE and press LEFT or RIGHT to change Auto 
Exposure TYPE 

 Mode 

sequence: 

 AES       AUTO IRIS       ME      
 

 

Shutter speed of each mode: 
AES    

 

mode: 1/50(1/60) to 1/100,000 sec. 

AUTO IRIS    mode: 1/50(1/60) sec 
ME   

 

mode: 1/50(1/60) to 1/100,00 sec. 

 

6.3.2.1.1 AUTO IRIS mode sub menu 

Press ENTER key, AUTO IRIS menu will be displayed on screen. 
Move cursor by UP/DOWN key to select adjustment item. 

 

IRIS LEVEL: Press LEFT or RIGHT to adjust the level for auto-iris lens (for DC type).   
Ranging from 0 to 10. 
FLICKERLESS

 

(NTSC system only, PAL system off): When function is 

set to “ON”, the shutter speed 1/60 sec will become 1/100 sec to 
Flickerless. (NTSC system) 

 

6.3.2.1.2 ME mode sub menu 

Press ENTER key to NORMAL menu, MANUAL EXPOSURE menu will 
be displayed on screen. Move cursor by UP/DOWN key to select 
adjustment item. 

 

Shutter Speed: 1/60(1/50), 1/120(1/100), 1/250, 1/500, 1/1,000, 
1/2,000, 1/5,000, 1/10,000 sec. 
Gain: You can increase or decrease the bright level. 

 

BLC: 

Press LEFT or RIGHT key to turn Back Light Compensation 

function ON/OFF 

 

AGC: 

You can increase or decrease the bright level low light condition. 

 E-ZOOM 

Press ENTER key to display E-ZOOM sub menu.

 

 

 
 

NORMAL MENU 

   



TYPE  

AES 

    BLC 

 

OFF 

  AGC 

 

00   

    E-ZOOM 

 

     
  RETURN 

ME MENU 

SHUTSPEED 1/50SEC 

  GAIN 

 

01 

     
  RETURN 

NORMAL MENU 

  TYPE   

AES 

    BLC 

 

OFF 

  AGC 

 

00 

  FLICKERSS   OFF 
    E-ZOOM 

 

     
  RETURN 

AUTO IRIS MENU 

IRIS LEVEL 

05 

FLICKLESS OFF 
     
  RETURN 

PUSH TO LOCK MENU 

 

 PTL  PUSH 

    

     
     
 RETURN 

Summary of Contents for WDS-HDR1527DN















Reviews: