Cod. 9201300 Pag.3
PHONNY MURO – PHONNY MURO PR
ELECTRIC WALL HAIRDRYER
WARNING: We exhort you to read this instruction manual carefully, and to conserve it, as it
gives important indications regarding installation security, use safety, and product
maintenance. A wrong installation of the device can cause damages to persons or things, for
which the manufacturer shall not be considered responsible.
This device has been down to a fine art, in compliance with the product regulations and the
applicable EU directives.
Quality tests carried out during the production stage, as well as careful trials assure the best
safety and operation reliability. The good operation and the life duration of the unit can be
prolonged if the product will be used correctly and a regular maintenance will be carried out.
General warnings
•
Do not use this device for any other purpose except hair dryer.
•
Before connecting the device make sure that the plaque data correspond to the data of
the electricity grid.
•
Installation must be done by a qualified staff following the instructions given by the
manufacturer. A wrong installation can cause damages to persons, pets or things, for
which the manufacturer shall not be considered responsible.
•
Place the unit so that even when the cable is drawn, it cannot be reached by a person
which is having a shower or a bath.
•
Do not use the product in the presence of corrosive or explosive gases.
•
Do not soak the hair dryer and do not touch it with wet hands.
•
Do not put the device where it can be exposed to atmospheric agents.
•
Do not make any kind of modification to the device.
•
The unit can be used by children not younger than 8 years old, and by persons with
reduced physical, sensitive or mental abilities, or without any experience and necessary
knowledge as long as they are supervised or after they’ve been informed about the safe
use of the product, and have understood the related dangers and risks. Children shall not
play with the device. Cleaning and Maintenance which has to be carried out by the user,
shall not be done by children without supervision.
•
As the unit has a fixed installation, the connection to the electricity grid shall be done by
means of a flexible cable with plug or through an omnipolar switch having a contacts
opening distance not inferior to 3 mm.
•
Do not obstruct the air way in/way out grids.
•
Should the device get damaged and/or operate in a wrong way, disconnect the device
from the mains supply and turn to the manufacturer or dealer.
•
Do not use the unit if the connection cable or the power cable is damaged.
•
At the end of product life, dispose of the unit in a correct way, giving it to a dedicated
centre (2002/96 EU Directive).
Technical data
230Vac 50Hz – 600/1200W – IP20 – 85m
3
/h – 11m/s -