10
STEP 03
Insert body and start operation
•
Place the filled body on the dock. The
body can only be placed on the dock if
the two violet markings point to each
other. This is the position for removal and
insertion. In this position, the flow rate
is zero.
•
Plug in the pump. By turning the body
counter-clockwise, you can increase the
flow rate. The flow rate can be read from
the scale at the bottom end of the body.
•
The filter media (exception: zeolite)
should be hold in suspense at all times. If
the filter media collects at the top spon-
ge, the flow rate is too high. If you cannot
detect any motion in the filter media, the
flow rate is too low.
(Fig. 5)
