ASSEMBLY
VIDEO INSTRUCTIONS FOR
AQUARIUM ASSEMBLY
ASSEMBLY INSTRUCTIONS:
•
At least 2 persons with sufficient physical strength are
required for assembly
•
Tools required: Phillips screwdriver, scissors for silicone
cord
•
Ready an underlay for intermediate placement of the
aquarium (e.g. carpet, towel)
•
Do not use blades to remove the protective film or open
boxes, because these can scratch the aquarium, cabinet
or doors
STEP 1: SELECTION OF THE INSTALLATION SITE
•
The floor on which the OPUS
®
300 is installed must be
level.
•
The floor on which the OPUS
®
300 is installed must be
sufficiently load-bearing. The OPUS
®
300 has a base
surface of approx. 98x66 cm (38.6 x 26 in) and a weight
of approx. 500kg (1,100 lbs) when filled. In case of doubt,
consult a structural engineer in this regard.
•
The aquarium should not be exposed to direct sunlight
because this can result in undesirable algae forming.
•
The room should exhibit a normal room temperature of
approx. 20 – 24 °C (68-75°F).
•
Do not install next to a radiator or an air conditioning
system.
6
Summary of Contents for OPUS 300
Page 1: ...OPUS 300 INSTRUCTIONS...
Page 4: ...SAFETY INSTRUCTIONS 4 Fig 1...
Page 34: ...NOTES 34...
Page 35: ...NOTES 35 EN...